Entertainment "FLUIDS" Safety Facts

Get the most enjoyment out of your entertainment solutions by following a few simple guidelines:

1. Don't play chemist with Foam, Snow, or Bubble solutions. Use the entertainment solutions as directed on the label. Don't mix ingredients with the entertainment chemical solutions.

2. Adding colors or dyes to the entertainment chemical solution could cause clothing and skin staining or rashes to develop.

3. Adding scents and smells to the entertainment chemical solution could cause rashes and other allergic reactions. Most scents and smells are aldehydes which are one step away from being acids.

4. The dryer the foam, the more fun will be had and the more bubbles per volume will be generated. Wet foam cause wet clothing. Wet clothing can cause chaffing and rashes to develop. People should exit the generated foam or snow before their clothing becomes wet or saturated. Small children should be reminded not to eat the foam for it could cause nausea as in the ingestion of any soap or surfactant.

5. If the foam feels gooey the water to foam ratio is not high enough and you are using too much foam solution.

6. Foam should be generated with a clean machine. Thoroughly rinse out the machine till no foam is generated. Then rinse the machine foam system with an alcohol (isopropyl rubbing alcohol). This helps flush out the molds, mildews, and bacteria that could be growing in the machine. If you have never cleaned your foam, snow, or bubble generator there is a good chance you are coating your clients in molds, mildews, or bacteria. This could lead to illness or allergic reactions.

7. To blow the best foam or snow (dry and made with the least amount of entertainment solution). The water used for diluting the foam or snow solution needs to be the softest possible. The harder the water the more entertainment solution will be needed to make the foam. This means more expense for you and more chance of  gooey foam. Water below 100 ppm in the hardness blows great foam. Water hardness above that leads to less desirable foam. The purchase of a water softener/purifier could increase the fun and the facts.

8. Don't save or store diluted or contaminated entertainment solutions. These dilutions can act as food sources for molds, bacteria, and mildews. Next time the stored unused solution is used rashes or other health issues could develop.

9. Plants do not like being trampled or drowned. This is why foam pits were invented. Be sure to remove the pit ASAP so the grass does not suffocate. Remember, if you are using 55 gallons of entertainment solutions, you are going to have 55 gallons of waste water to dispose of, unless you blow dry foam that evaporates carrying the water away with it.

10. If something is not going as planned stop and think..........

This notice is meant to advise all foam, snow, bubble solution users of just some of the difficulties that could arise in the use of entertainment solutions. Since the manufacturer has no control over the use of this product, sole liability for the use of this product is the responsibility of the person generating the entertainment solutions.

RJN Industries Inc.

Copyright 2009